Series 5951
AIRDAMP 250W
Reverse osmosis rotary humidifier with anti-legionella filter and built-in pre-heating hydronic coil
Air is pre-heated by the hydronic coil and then conveyed through the evaporator. This runs at a fixed speed, the humidity level is managed by increasing/decreasing the water level in the underneath tank. Temperature can be managed with an external sensor.
Rotary aluminium blade evaporator with stainless steel tank and painted RAL9010 galvanised sheet structure. Fully inspectable, easy to use, with low operating costs and minimal maintenance. |
Built-in timed trigger antibacterial and anti-legionella UVC lamp on the water inlet. |
Built-in anti-limestone reverse osmosis filter. |
Built-in backlit display (10sec) and adjustment. |
Built-in anti-overflow float and rH sensor. |
Dimensioni (LxHxP): 550x385x360mm, Peso (senza/con acqua) 25/28 kg |
DHW hydronic connections: 3/4" |
Connections of hydronic coil: 10mm |
Condensate drain connection: DN40 |
Power supply: 230V/50Hz |
IP20 Protection |
Operating range: +40/+60% rH, +15/+25°C |
Portata aria: max 350 m³/h |
Head loss: 80 Pa |
Power demand: 100 W |
Temperatura mandata/ritorno (°C): 40/35 |
Temperatura ingresso/uscita aria (°C): 15/25 |
Quantità d'acqua: 0,24 m³/h |
Capacità di evaporazione: max 2,5 l/h |
Humidifier with built-in hydronic pre-heating
Code | Model | Description | Pack | Pallet m | Cat. | €/m |
5951.25.16 | AIRDAMP 250W | 250 m³/h, DN160, cfg DX (in), +2,5 lt/h | 1 | 1 | 71.01 | 7946,26 |
5952.25.16 | AIRDAMP 250W | 250 m³/h, DN160, cfg SX (in), +2,5 lt/h | 1 | 1 | 71.01 | 7946,26 |